Floor Coating Specifications

(An explanation of application procedures used )

 

Standard Flake Chip Epoxy System

 

We are pleased to quote the following cost for the preparation and coating of your concrete floor area.  The following system is used as follows:

 

Surface Preparation

 

1. Entire new concrete area to be diamond ground by machine and hand held diamond grinding devices and via non-acid chemical manipulation.
2. All areas will be cleaned deeply in advance of coating.

 

Coating System Thickness

 

Performance E-350 High Wear Chemical Resistant Cycloaliphatic Epoxy up to

20 mils DFT (10 Coats of normal garage floor paint in thickness)

 

Optional Note:

 

Specificied above is the best form of high solids epoxy for floor coating.  This product will wear longer, offer better chemical resistance, resist yellowing better, resists sweating and cures harder than polyamide, aliphatic, amido-amine, etc. epoxies which have less performance qualities. 

 

Crack/Expansion Joint/Hole Filling (Included)

 

We will fill minor cracks and spalls with performance Crack Filler and polymer enhanced quick patch materials.

Most competitors will not add crack/hole filling in their quote but make it an additional cost.  Amazing Garages makes this a standard due to the fact it will give you a better flooring system with a monolithic look.  Cracks, and holes are more noticeable with a high gloss application.  Debris will also embed itself into these crevises if not properly patched.  Please note that with the movement of concrete, some cracks may re-appear, (Especially in expansion areas), but the coating will not peel from those areas and the crack is usually much less noticeable in these instances.

 

Non-Skid Additive (Optional/Included)

 

White aluminum oxide non-skid will be broadcast onto the floor if desired.

 

Note:

 

Some competitors will not add non-skid additive in their quote but make it an extra. Amazing Garages makes this a standard offering due to the fact that it will give you a safer flooring system.

 

Flake Chips

 

Some Competitors will not add flakes chip options available as a component of the flooring system.  Amazing Garages not only offers chips as an inclusive offering, but allows clients to choose both chip combinations and the amount of chips (light, medium or heavy) per application.

 

** There is an additional charge for each separate mobilization to complete the job (if requested by client) to be based upon distance and time required for additional mobilizations

 

Payment Terms

 

50% Upon Inception
50% Upon Completion
Cash/Check/Credit Card/Paypal

Warranty

 

Amazing Garages shall warranty its work against flaking and peeling, for a period of six years starting from the invoice date, (providing the job has been installed according to stated terms above, has been allowed to properly cure per recommended guidelines and the installation has been paid in full to terms).  Amazing Garages cannot warranty where there has been an existing coating adhesion to the concrete, if deficient concrete material exists or in conjunction where any work that we have not performed may impact the flooring integrity .  This warranty applies to flaking or chipping coatings caused as a direct result of product failure.  The sole and maximum liability of Amazing Garages under this warranty will be at the option of Amazing Garages to patch failing area/areas or recoat all coated areas which Amazing Garages deems advisable.

 

The Express Warranties set forth in this contract are in lieu of all other warranties, expressed or implied, including, without limitation, any warranties of merchantability or fitness for a particular purpose.

 

Customer agrees that its exclusive remedies, and the entire liability of Amazing Garages with respect to the specified floor coatings, are set forth in this agreement.  Amazing Garages will not be liable to customer for any damages, including loss of profits or other incidental or consequential damages arising out of its use of the floor coating or the breech of any warranty.

 

Conditions Not Warranted

 

Hydrostatic pressure (Hydrostatic pressure is caused from moisture pressure eminating from underneath the concrete slab.  Hydrostatic pressure can cause blisters, bubbles, and other effects in a resinous coating).  Sub-Surface contaminants, (Oil, or other contaminants that can come up from within the concrete slab) could also cause coating failure.

Deficient Concrete (Concrete that breaks apart) and exhibits reduced integrity, areas where previous coatings could not be removed or where diamond grinding could not properly scarify these areas are also not warranted.   Non skid materials will wear out over time and will need to be reapplied.  Amazing Garages accepts no responsibility as to the time or amount of wearing.  The customer is responsible to maintain its own safe limits for slip resistance throughout the life of the flooring application.

 

Our company desires that the customer is satisfied with his/her understanding of the work and experience with our company.   We look forward to a very happy, long term relationship with you in the future.  If there are any problems or concerns you may have, please feel free to contact us at any time.  770-908-3333.  Thanks for your time and the opportunity to quote your requirements.

 

Sincerely,

 

Gary Damm

Principal

Amazing Garages